POINTS FORTS

– Modem/Routeur sans fil ADSL2+
– Vitesse de transmission 150Mbs
– 4x ports LAN 10/100 Mbps
– 1x port WAN 10/100 Mbps
– Antenne 5dBi

– Protection sans fil WPS
– Fonction de partage IP Sharing
– Fonction Virtual Server & DMZ

CARACTERISTIQUES TECHNIQUES

Modèle
AR-7186WnA

Type
Modem/Routeur

Coloris
Blanc

Interface physique
1x RJ11 WAN
4x RJ45 LAN
1x bouton WPS
1x bouton WLAN
1x antenne 5dBi
1x bouton On/Off

Standard sans fil
IEEE 802.11b,IEEE 802.11g and IEEE 802.11n

Fréquence
2400–2484 MHz

Vitesse du signal
150Mbps max

Management
– Configuration basé WEB
– Firmware upgradable Web page/XMODEM/FTP/TFTP
– Interface commande en ligne via Serie, telnet, SSH
– Plug’n’Play universel
– Protocole de management WAN
– Mise à jour date/heure via SNTP time server

Fonctionnalité ADSL
– Annex A, B,I, J, L & M
– ANSI T1.413i2
– ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite)
– ITU G.992.3 ADSL2 (G.dmt.bis), ITU G.992.4 (G.lite.bis)
– ITU G.992.5 (G.dmt.bisplus), ITU G.994.1 (G.hs)
– ITU G.995.1, ITU G.996.1, ITU G.997.1
– Power saving mode, L3 to L0 initialization
– Supports multiple PVCs
– Supports traffic shaping (ATM QoS) UBR, CBR, VBR-rt, VBR-nrt
– Supports OAM F4/F5 loop-back, AIS, and RDI OAM cells
– UNI 3.1/4.0 permanent virtual circuits

Fonctionnalité sans fil
– Compatible with IEEE 802.11b,IEEE 802.11g and IEEE 802.11n
– Supports auto channeling
– 1T1R mode with 150Mbps PHY rate for both transmitting and receiving
– Legacy and high throughput modes
– 20MHz/40MHz Bandwidth
– Supports 64/128-bit WEP, 802.1x, WPA and WPA2 wireless security
– Multiple BSSID support
– Wireless frequency range: 2400–2483 MHz ISM band
– 802.1x authentication

Sécurité
– Management access control for LAN/WAN sides
– Prevent port scanning, denial-of-service (DOS) and LAND attacks
– Stateful packet inspection (SPI)
– IP spoofing, IP with zero length
– IP/ MAC filtering, application filtering, URL filter

Puissance de transmission
– 11n: 14±1.5dBm
– 11g: 15±1.5dBm
– 11b: 16±1.5dBm

Dimensions
135 x 118 x 28 mm

Certification
CE

Ces spécifications sont fournies à titre indicatif. SELECTIC se réserve le droit de les modifier sans préavis.“